wireless

Traverse is an easy-to-use network management product with integrated fault and performance monitoring capabilities. Traverse has a scalable and extensible architecture, can be deployed within an hour, and requires minimal training to use. Traverse can monitor your wireless infrastructure, and some of the supported devices include:

  • Cisco, Linksys, Redline, DragonWave, Cyclades, Tasman, Nextnet

Supported Metrics

  • Redline AN-80

  • Wireless Link Status
  • Wireless Noise to Signal Ratio
  • Wireless Signal Strength
  • Wireless Uncoded Burst Rate
  • Wireless Discards
  • Wireless Link Status
  • Wireless Noise to Signal Ratio
  • Wireless Packets
  • Wireless Retranmissions
  • Wireless Signal Strength
  • Wireless Uncoded Burst Rate
  • NextNet

  • GPS Clock Status
  • NextNet GPS Clock Status
  • One-Second-Pulse Status
  • NextNet Operational Status
  • AirLink Status
  • Chassis Temperature
  • Base Station Transmit Power
  • NextNet Base Station Transmit Power
  • Base Station Downlink Saturation
  • NextNet Base Station Link Saturation
  • Base Station Uplink Saturation
  • Number of Registered CPE
  • NextNet Registered CPE/Hosts
  • Number of Registered Hosts
  • VLAN Uplink Traffic
  • VLAN Downlink Traffic
  • VLAN Uplink Unicast Packets
  • VLAN Uplink Broadcast Packets
  • VLAN Downlink Unicast Packets
  • VLAN Downlink Broadcast Packets
  • Cisco Wireless Access Point

  • Wireless: SSID Broadcast Setting
  • Wireless: Successful Associations
  • Wireless: Successful Dessociations
  • Wireless: Successful Ressociations
  • Wireless: Nodes Roamed
  • Wireless: Encapsulation Error
  • Wireless: Decapsulation Error
  • Wireless: Duplicate Sequence
  • Wireless: WEP Key Mismatch
  • Wireless: SSID Mismatch
  • Wireless: Associated Clients
  • Disk Space Utilization
  • CPU Utilization
  • Physical Memory Utilization
  • Virtual Memory Utilization
  • System Uptime
  • Network Interface: Availability
  • Network Interface: Bandwidth Utilization
  • Network Interface: Packets Transmitted
  • Network Interface: Traffic Volume
  • DragonWave

  • System Operational Status
  • DragonWave AirPair System Status
  • Peer Authentication Status
  • DragonWave AirPair Peer Authentication Status
  • NIC Frames
  • NIC Receive Errors
  • NIC Undersized Frames
  • NIC Oversized Frames
  • Modem Operational Status
  • Radio Operational Status
  • Radio RX Signal Level
  • DragonWave AirPair RX/TX Signal Strength
  • Radio TX Gain
  • DragonWave AirPair RX/TX Gain
  • Radio RX Gain
  • Radio TX Power
  • Modem Loss Of Signal Lock Alarm
  • DragonWave AirPair Modem Alarms
  • Modem BER Threshold Exceeded Alarm
  • Modem PLL Lock Failure Alarm
  • Modem Loss Of Sync Bytes Alarm
  • Modem FIFO Over/Underrun Alarm
  • Modem SNR Threshold Dropped Alarm
  • Radio PLDRO/LO Lock Lost Alarm
  • DragonWave AirPair Radio Alarms
  • Radio RS232 Communication Lost Alarm
  • Radio Frequency Mismatch Alarm
  • Radio Power Amplifier Alarm
  • Radio RSL Threshold Dropped Alarm
  • Ruckus ZoneDirector

  • Global Associated AP count
  • Global Authorized Client Devices count
  • Global Rogue Device count
  • AP Status
  • AP Authenticated Clients
  • AP Rogue Device count
  • AP Total Concurrent Users
  • Tasman Networks

  • Traffic
  • Packets
  • Chassis Temperature
  • Fan Status
  • Environmental Status
  • Power Supply
  • Cyclades

  • Port Alarm
  • Cyclades ACS Port Alarm Condition
  • Port Traffic
  • Port Parity Errors
  • Port Overrun Errors
  • Wireless LAN (WLAN)

  • Wireless SSID Broadcast
  • Wireless Associations
  • Wireless Disassociations
  • Wireless Reassociations
  • Wireless Nodes Roamed
  • Wireless Encapsulation Errors
  • Wireless Decapsulation Errors
  • Wireless Duplicate Sequence
  • Wireless WEP Key Mismatch
  • Wireless SSID Mismatch
  • Wireless Clients
  • Wireless Neighbor AP